Connect with us

Life Science-old

Mass Spectrometers

Product listing of various models available in the Indian market, with detailed capabilities and features, by brand

Brands Models Features
Bruker Daltonics FT-MS solariX XR High-end proteomics studies (top-down and bottom-up workflows); molecular imaging of tissue; petroleum product analysis; complex environmental sample analysis; metabolomics research
Sciex 4500, 5500, 5600, X500 QTRAP technology line enables powerful workflows, delivering ten unique scan functions for higher confidence identification and reliable quantitation. The X500 QTOF series are the first accurate mass systems that can deliver true qualitative and quantitative results in a single injection, and coupled with SWATH acquisition software, can lift lab to new heights whether performing routine testing or more advanced analyses. Triple quad mass spectrometers revolutionize quantitation with higher sensitivity, speed, and performance, from low mass to high mass compounds, in positive or negative polarity and in a single injection
Shimadzu Analytical GCMS-TQ8050 NX Features a new highly efficient detector and three noise reduction technologies that enable femtogram-level quantitative analysis
GCMS-TQ8040 NX First triple quadrupole with smart productivity for high efficiency sample throughput, smart operation for quick and easy method development, and smart performance for low detection limits and scan/MRM
GCMS-QP2020 NX Featuring enhanced instrument functionality, analysis software, databases, and a sample introduction system; helps maximize the capabilities of the laboratory
GCMS-QP2010 SE Column flow up to 4 mL/min and variety of column selection; enables direct sample injection and easy expandability without any changes to the GC
LCMS-8060NX A triple quadrupole mass spectrometer with world-class sensitivity and detection speeds. Advance features of IonFocus unit, new analytical intelligence-derived parameters optimization and new heated ESI design, enhances performance, sensitivity and robustness. LCMS-8060NX maximize laboratory’s output and improves workflow efficiency.
  LCMS-8060 Newly developed UF-Qarray ion guide is a groundbreaking technology that increases LC/MS/MS sensitivity by enhancing ion signal intensity and reducing noise; By improving the ion sampling device, the ion guide, and the vacuum efficiency, the LCMS-8060 delivers a new vision of sensitivity and makes a real difference to working better and faster
DPiMS-8060 Use both modes by switching easily between ESI and PESI units. Performs MS analysis directly on sample. With a few steps pretreatment, speedy and easy measurement is possible
CLAM-2030 Fully automated sample preparation module for LCMS minimizes human error. Increases laboratory efficiency by allowing user to directly place the sample in system
LCMS-8050 Offers high-sensitivity quantitation delivered at high speeds; rapid multi-component analysis; simultaneous qualitative and quantitative analyses; UF scanning at 30,000 u/sec, UF switching-positive/negative Ionization switching in 5 msec, UF-MRM at 555 ch/sec
LCMS-8045 MS interface includes a high-sensitivity heated ESI source, heated capillary sample introduction, and proprietary ion transfer optics; produce robust MS performance
LCMS-8040 Incorporates newly improved ion optics and collision cell technology to provide higher multiple reaction monitoring (MRM) sensitivity which yield higher sensitivity for scan mode measurements
LCMS-2020 Ultra high-speed, ultra high-sensitivity MS measurements offers dramatic improvements in lab productivity; with below innovative features in LCMS-2020, the sharp peaks of ultra-high-speed LC will not be missed; UF switching (high-speed positive/negative ionization mode switching); UF scanning (high-speed scan measurements); UF sensitivity (superior sensitivity and repeatability thanks to newly developed ion optics)
LCMS-9030 Q-TOF LC/MS system A quadrupole time-of-flight (Q-TOF) mass spectrometer integrates the world’s fastest and most sensitive quadrupole technology with TOF architecture
LCMS-IT-TOF Combines QIT (ion trap) and TOF technologies; Source design, desolvation capillary and reduced collision ion focusing Q-Array
MALDI-TOF Combines MALDI TOF-TOF mass spectrometry expertise with novel patented technology to provide ultimate performance in identification and structural characterization of biomolecules
Waters India SYNAPT G2-Si Ultimate UPLC-MS/MS performance; powerful data independent and data dependent solutions; CID and ETD fragmentation capabilities; wide range of experimental options; upgrade to three dimensions of resolution
Xevo G2-XS Maximum robustness with no compromise in performance; highest quality, most comprehensive qualitative, and quantitative information
Xevo TQ-XS Triple quadrupole; enhanced detection system with six orders of linear dynamic range to ensure sensitivity
Vion IMS QTof Ion mobility quadrupole TOF mass spectrometry; easier data interpretation as ion mobility cleans up and simplifies every spectrum
Xevo TQ-S micro Triple quadrupole mass spectrometry; robust performance from a compact design; quantify more analytes in a single injection; standard ion source flexibility

 

Product Showcase

PS-10
Sysmex India Pvt. Ltd.

The success of a medical laboratory setup is driven by the innovative solutions provided to the patients as well as to the clinical community. The procedure, data and inferences in medical laboratories are the keys to drive the series of clinical decisions. Being the most trusted partner Sysmex comes up with a fully automated sample preparator system for the flow cytometry laboratory.

PS-10 flow cytometry sample preparation system alleviates the primary bottleneck in today’s busy clinical flow cytometry laboratory, while providing unparalleled flexibility for the creation of complex, laboratory developed tests. It is a highly automated, flexible system for routine flow cytometry applications. It helps highly trained operators to concentrate on analyzing data and allows existing laboratory procedures to be easily incorporated.

It substantially improves the laboratory processes with continuous, uninterrupted sample introduction, and work list creation virtually eliminating operator dependent variability. It uses powerful tools, which allows to easily create custom tests, panels, and procedures. The dual pipetting probes, robust, reliable cap piercing, and automatic allocation of daughter tubes allows to maximize the workflow efficiency.

The Sysmex PS -10 has created a new standard for the no- wash assay throughput. For the wash assays, the PS-10 rotos, which are compatible with the Helmer UltraCW II automatic cell washing system is easy transferred for the washing steps. Sample preparation and automated cocktailing is done in one system. This unit being completely open system, allows antibodies from other manufactures to fit in conveniently.

With Sysmex CyFlow monoclonal antibodies and the PS-10, Sysmex offers a new vision for flow cytometry making it a thoughtful automation for a new level of workflow efficiency.

 

Copyright © 2024 Medical Buyer

error: Content is protected !!